Μετάβαση στο κύριο περιεχόμενο

Nassos Kranidiotis in spacetime

Αναζήτηση αυτού του ιστολογίου

Normal life is like a pendulum

την Δεκεμβρίου 24, 2016

Λήψη συνδέσμου
Facebook
Twitter
Pinterest
Ηλεκτρονικό ταχυδρομείο
Άλλες εφαρμογές

Λήψη συνδέσμου
Facebook
Twitter
Pinterest
Ηλεκτρονικό ταχυδρομείο
Άλλες εφαρμογές

Σχόλια

Δημοσίευση σχολίου

Δημοφιλείς αναρτήσεις

Put ZXV10 H201L in Bridge Mode

If you have a spare ZXV10 H201L router and you want to make a bridge connection with your main router, then follow the following steps: Connect the ZXV10 H201L to your computer using an ethernet cable and port. Open your browser and browse to 192.168.1.1 (or whatever is the gateway of the router ZXV10 H201L). Log into the setup menu of the router. Go to Network/WAN/WAN Connection and enable the option PPPoE pass-through, and enable NAT. Go to LAN and change the IP of the router. Then, disable the DHCP server. Finally, disable the firewall and any port forwarding you might set up. Now, everything is set up and you are ready to connect the ZXV10 H201L router with an ethernet cable to the main router. ZXV10 H201L will have its own access point and wireless devices may connect through it.

Από το Blogger